The selection of cutting tools for engraving machines requires the appropriate size of the tool chuck. The chuck has a cross-section, the inner hole is not deformed enough to be round, is worn over a long period of time, and the inner hole has a taper. You must not choose a chuck, which may easily cause the tool handle to tremble. Unable to produce satisfactory engraving results.
2. The tool holder should match the jacket and be able to enter and exit the jacket flexibly. The tool holder should be able to be firmly put into the jacket and tightened. If the inner hole of the tool jacket is deformed after being used for too long, it should be replaced with a new one immediately. Jacket.
3. Always check the toughness and sharpness of the tool. If you find that the tool is blunt or the edge is damaged, it is best to replace it immediately. If you do not replace it, continued use will not only result in poor engraving results, but may also lead to the risk of the tool breaking.
4. The cutting tools used by the engraving machine require that the thickness of the material being processed cannot exceed the thickness that the cutting edge can cut and engrave. Otherwise, the cutter may break or the engraving effect is unsatisfactory.
5. For engraving and cutting different materials, different tools should be used and the cutting and engraving speed should be reasonably modified.
6. During the operation of the engraving machine, the high-speed rotating tools are very sharp. Please pay attention to keeping your body parts as close as possible to the workpiece being processed. Pay special attention not to wear work clothes that are too large. Women should wrap their hair to prevent accidents. .
7. The speed of the cutting tool of the engraving machine should be kept balanced, and the processing speed should be kept as consistent as possible. It is best to use one cut to the end during the engraving and cutting process to prevent breakpoint cross-section marks.
8. It is best to use professional cleaners to clean knives.
9. When the knife is not in use, applying butter can prevent the knife from rusting.
10. Do not polish or change the shape of the blade yourself when using engraving tools.